Horserail® Hardware

Horserail Display

A. Fixed Top T-Buckle: (Special Order Only) Please contact us.

B. Straight Attaching Buckle: For use on buildings or other flat surfaces.

C. Fixed T-Buckle: (Special Order Only) Please contact us.

D. Top Line Post Bracket (Optional): This Bracket positions the rail flush with the top of the post. Use four 2 ̋(5 ) 8-gauge non-rusting screws (not deck screws), one in each hole.

E. Line Post Bracket: This is the standard method of attaching the rail to the line post. Use four 2 ̋(5 ) 8-gauge non-rusting screws (not deck screws), one in each hole.

F. Top 90° Inside Corner Bracket: This Bracket positions the rail flush with the top of the post. Use this heavy duty, uniquely designed bracket for when you want to make up to a 90 degree turn. The corner post can safely stay outside and away from the horse and riders.

G. 90° Inside Corner Bracket: Use this heavy duty, uniquely designed bracket for when you want to make up to a 90 degree turn. The corner post can safely stay outside and away from the horse and riders.

H. Tensioning Spooler: The Spooler can be placed anywhere on the rail, at any time, by first holding it up to the rail and then sliding the removable section into the appropriate slot. Tighten and set locking pins.

I. Joining Buckle: Used to join two sections of rail. No exposed wires or connectors in this installation.

J. Beveled Line Post Bracket for Curved Corners: This unique curved edge ribbed Bracket can handle up to a 10 degree directional change with minimal friction to the rail. This allows the installer to place the rail on the inside of a corner post, giving a lot of safety to both horse and rider in riding arenas. Use four 2 ̋(5 ) 8-gauge non-rusting screws (not deck screws), one in each hole.

K. Adjustable Top T-Buckle: This Buckle positions the rail flush with the top of the post. Can be used for cross fencing off of an existing Horserail fence line – if sufficiently braced. It allows one rail to through the “bracket” portion of the unit while at the same time supplying an end buckle assembly for the other rail row.

L. Adjustable T-Buckle: Can be used for cross fencing off of an existing Horserail fence line – if sufficiently braced. The T-Buckles allow one rail to run through the “bracket” portion of the unit while at the same time supplying an end buckle assembly for the other rail row.

M. Pre-Bent 45° Attaching Buckle: For use on large diameter end posts – to assist in alignment and tensioning of the rail. Also helps prevents post rotation.

Patent Numbers: 6,533,881; 6,431,487; 7,566,047 and Other Patents Pending